Leveluk K8

Eight-plate continuous ionised electrolysis water generator with a touch panel and voice guidance.

The Leveluk K8 is a continuous ionising water generator that connects to a kitchen tap through a diverter. It passes filtered tap water across eight platinum-plated titanium electrodes and produces seven selectable outputs across five water types, from approximately pH 2.5 to approximately pH 11.0.

Three of those outputs are Kangen Water® at approximately pH 8.5, 9.0 and 9.5, and one is Clean Water at approximately pH 7.0. The remaining three — Beauty Water at approximately pH 6.0, Strong Acidic Water at approximately pH 2.5 and Strong Kangen Water at approximately pH 11.0 — are not for drinking, and Enagic's manual states so explicitly for each.

The unit runs on 100–240 V and is supplied with a power cord matched to the country of sale. It weighs approximately 5 kg and stands 34.5 cm tall.

Produces

Enagic's manual gives a use and, where one applies, a caution for every pH level. Both are reproduced below as the manual states them. The pH values are approximate.

Water types the Leveluk K8 produces, with the manual's stated use and caution
WaterApproximate pHUse, as the manual states itCaution, as the manual states it
Kangen Water9.5For everyday drinking. Ordinary drinking water, or making coffee and black tea.Not to be used with medicine. When taking medicine, select the Clean Water mode.
Kangen Water9.0For those already used to drinking Kangen Water. Draws out the flavour of ingredients, so food needs less seasoning.Not to be used with medicine. When taking medicine, select the Clean Water mode.
Kangen Water8.5The starting point. The level Enagic recommends for people getting used to Kangen Water.Not to be used with medicine. When taking medicine, select the Clean Water mode.
Clean Water7.0To be taken with medicine or for preparing baby formula. Can also be used as everyday drinking water.
Beauty Water6.0To be used as astringent water and bath water.Not for drinking. Enagic advises consulting a physician before use if you have sensitive skin or allergies, and discontinuing use if skin irritation occurs.
Strong Acidic Water2.5To be used for cleansing kitchen utensils such as knives, and countertops, to prevent cross-contamination.Not for drinking. Discharged from the secondary hose, not the flexible pipe. Enagic advises producing it only in a well ventilated room and avoiding prolonged breathing of the vapours. Requires the electrolysis enhancer tank.
Strong Kangen Water11.0Dissolves tough kitchen grease, cleans floors, and washes fish, meat and vegetables.Not for drinking. Produced from the flexible pipe while Strong Acidic Water is produced from the secondary hose.

Specifications

Figures are taken from the Leveluk K8 product manual unless noted otherwise. Where the manual and Enagic's product pages disagree, the manual is used, because it is the engineering document.

Production rates are quoted at a feed water pressure of 100 kPa. Australian mains pressure is commonly higher than that, and the rate rises with it — a figure quoted without its pressure is not comparable.

The K8 is the only product on this site with independently tested performance figures. Enagic states it is tested to NSF/ANSI 42 and certified by the Water Quality Association to NSF/ANSI 42, NSF/ANSI 372 and CSA B483.1. Two test results are published: chlorine taste and odour reduction averaging 98.9% at an influent concentration of 2.0 mg/L, and Particulate Class III reduction, covering particles from 5 to under 15 micron, averaging 97.1% against an 85% requirement.

These are the manufacturer's published test results against a named standard, not a claim about health outcomes.

Leveluk K8 specifications and where each figure comes from
SpecificationValueSource
Electrode plates8enagic.com/en/products/leveluk-k8
Plate size135 x 75 mmenagic.com/en/products/leveluk-k8
Negative ORP-722 mVenagic.com/en/products/leveluk-k8
ORP range across water types+1130 to -800 mVbrochure_kangen8_202502
Acidic water production rate1.5 - 2.6 L/minenagic.com/en/products/leveluk-k8
Display and voice languages10enagic.com/en/products/leveluk-k8
Warranty5 yearsenagic.com/en/products/leveluk-k8
Model numberA26-00LeveLuk K8 product manual p.rear cover
Water connectionOne way diverterLeveLuk K8 product manual p.EN35
Ionising systemContinuous ionising system, built-in flow rate sensorLeveLuk K8 product manual p.EN35
Electrode and ionising cell materialPlatinum-plated titaniumLeveLuk K8 product manual p.EN35
Water types produced5 typesLeveLuk K8 product manual p.EN6
Selectable electrolysis levels7 levelsLeveLuk K8 product manual p.EN35
pH range across all settingsApprox. pH 2.5 to pH 11.0LeveLuk K8 product manual p.EN35
Kangen Water® pH settingsApprox. pH 8.5, pH 9.0, pH 9.5LeveLuk K8 product manual p.EN35
Clean Water pHApprox. 7.0 pHLeveLuk K8 product manual p.EN35
Beauty Water pHApprox. 6.0 pHLeveLuk K8 product manual p.EN35
Strong Kangen Water pHApprox. 11.0 pHLeveLuk K8 product manual p.EN35
Strong Acidic Water pHApprox. 2.5 pHLeveLuk K8 product manual p.EN35
Stated potable rangepH 8.5 to 9.5LeveLuk K8 product manual p.EN19
Electrolysis current adjustmentAdjustable by + and - on the pH setting screen; default setting 4LeveLuk K8 product manual p.EN22
Kangen Water production rate3.5 L/min (0.92 US gal/min)LeveLuk K8 product manual p.EN35
Strong Acidic Water production rate1.3 L/min (0.34 US gal/min)LeveLuk K8 product manual p.EN35
Rated service flowApprox. 4.16 L/min (1.1 US gallons/minute)LeveLuk K8 product manual p.rear cover
Feed water pressure at which production rates are quoted100 kPa (14.3 psi)LeveLuk K8 product manual p.EN35
Applicable water pressure50-500 kPa (approx. 0.5-5 kgf/cm2)LeveLuk K8 product manual p.EN35
Available water temperature5-35 degC (41-95 degF)LeveLuk K8 product manual p.EN35
Room temperature for siting5-40 degC (41-104 degF)LeveLuk K8 product manual p.EN10
Relative humidity for sitingLower than 90%LeveLuk K8 product manual p.EN10
Power supply100-240 V AC, 50/60 Hz, 2.6-1.1 ALeveLuk K8 product manual p.EN35
Power consumptionApprox. 230 W when producing at a high Kangen pH levelLeveLuk K8 product manual p.EN35
Dimensions (H x W x D)Approx. 34.5 x 28.0 x 14.7 cmLeveLuk K8 product manual p.EN35
WeightApprox. 5 kg (11 lb)LeveLuk K8 product manual p.EN35
Filter materialGranulated antibacterial activated charcoal, calcium sulfiteLeveLuk K8 product manual p.EN35
Filter replacement intervalApprox. 1 year or 6000 litresLeveLuk K8 product manual p.EN35
Chlorine taste and odour removal capacityAesthetic chlorine, taste and odour up to approx. 5678 litres (1500 US gallons)LeveLuk K8 product manual p.EN35
Chlorine taste and odour reduction (NSF/ANSI 42 test)98.9% average at 2.0 mg/L influentLeveLuk K8 product manual p.rear cover
Particulate Class III reduction (5 to under 15 micron)97.1% average against an 85% requirementLeveLuk K8 product manual p.rear cover
Substances not removedMetal ions and salt dissolved in the original tap waterLeveLuk K8 product manual p.EN35
Water filter case materialABS resinLeveLuk K8 product manual p.EN26
Automatic ionising cell cleaning10 seconds when the water is stopped after more than 10 minutes of Kangen or Beauty water; 30 seconds when no water has passed through the unit for 24 hoursLeveLuk K8 product manual p.EN35
E-Cleaning cycle durationApprox. 3 hoursLeveLuk K8 product manual p.EN27
Stated E-Cleaning frequencyOnce every week or two weeksLeveLuk K8 product manual p.EN27
Electrolysis enhancer systemForced dissolving adding type for Strong Acidic Water productionLeveLuk K8 product manual p.EN35
Enhancer refill indicationVoice guidance, LCD messageLeveLuk K8 product manual p.EN35
Optional mineral additiveCalcium lactate 20 g dissolved in 400 ml of water in the mineral solution tankLeveLuk K8 product manual p.EN22
Protective deviceCurrent fuse 250 V 6 A with heat protectLeveLuk K8 product manual p.EN35
Detection deviceDetection of temperature rise and hot waterLeveLuk K8 product manual p.EN35
DisplayTouch display with voice guidanceLeveLuk K8 product manual p.EN9
Display brightness settingsBright / Natural / Dark; default NaturalLeveLuk K8 product manual p.EN17
Automatic power-off (sleep)Selectable 1 to 5 minutes; default 1 minuteLeveLuk K8 product manual p.EN17
Certifications statedTested to NSF/ANSI 42 and certified by WQA to NSF/ANSI 42, NSF/ANSI 372 and CSA B483.1; ISO 9001:2008 and ISO 13485:2003 (TUV Rheinland ID 9105070879); ISO 14001:2004 (DNV)LeveLuk K8 product manual p.rear cover

Price by country

Enagic sets its price separately in each country. These are the published prices before tax; each country's price list shows the tax, the total and the payment plans.

CountryOptionPrice before taxFull price list
Australia$6,170.00 AUDAustralia price list
Canada$6,380.00 CADCanada price list
United States$5,890.00 USDUnited States price list
New Zealand$6,630.00 NZDNew Zealand price list
United Kingdom€4,600.00 EURUnited Kingdom price list

Maintenance

The K8 cleans its own ionising cell automatically. A short cycle runs for about ten seconds when the tap is closed after ten minutes or more of producing Kangen Water or Beauty Water, and a longer cycle of about thirty seconds runs when the machine has been idle for more than twenty-four hours. Water discharged during either cycle is not to be used.

Two maintenance tasks fall to the owner. The water filter is replaced approximately once a year or every 6,000 litres, whichever comes first, and the machine tracks both and says when it is due. E-Cleaning, which removes calcium from inside the unit using a citric acid powder supplied by Enagic, takes about three hours and Enagic's manual suggests it every week or two.

Enagic states that a filter it does not recognise causes the machine to mis-measure the water volume, and that using one may cause a breakdown and void the warranty.

E-Cleaning a LeveLuk K8

What isn’t published

Enagic's website and its manual disagree on the pH range. The product pages state a range to pH 11.5; the manual's specification table gives pH 11.0. This page follows the manual, because it is the engineering document, and records the disagreement rather than resolving it.

The manual does not state the plate count. Eight plates at 135 x 75 mm comes from Enagic's product pages. The manual specifies the electrode material and the ionising system but gives no number, so the most commonly cited figure about this machine is not in its engineering document.

No filter clogging indicator is published. The machine tracks elapsed time and water volume and says when replacement is due on either count, but Enagic states it does not detect clogging. An owner has flow rate and taste to go on and no published threshold for either.

Questions

What does a Leveluk K8 cost in Australia?

The recommended price is $6,787 including GST, which is $6,170 before GST. An instalment plan is available over ten or twenty-four months.

Can the K8 be paid off monthly?

Yes. Enagic's E-Payment plan offers ten months at $514 after an initial payment of $1,900, or twenty-four months at $252 after an initial payment of $1,123. Both cost more than paying outright — $253 more over ten months and $384 more over twenty-four.

How many plates does the K8 have?

Eight, made of platinum-plated titanium. The manual does not state the plate count; the figure comes from Enagic's product pages, which give the plate size as 135 × 75 mm.

What pH range does the K8 produce?

Approximately pH 2.5 to approximately pH 11.0, across seven selectable levels. Enagic's product pages state a range to pH 11.5; the manual's own specification table gives pH 11.0, and the manual is used here.

How often does the filter need replacing?

Approximately once a year or every 6,000 litres, whichever comes first. The machine tracks water volume and elapsed time and indicates when replacement is due. It does not indicate clogging, so Enagic advises replacing the filter if flow drops noticeably or the water tastes or smells unusual.

What water can the K8 be connected to?

Municipally treated water approved for drinking, cold, at a pressure between 50 and 500 kPa and a temperature between 5 °C and 35 °C. Enagic states the machine must not be used with water that is microbiologically unsafe or of unknown quality without adequate disinfection, nor with salt water or excessively hard water.

Is the K8 sold in Australia?

Yes, by Enagic Australia, through independent distributors.

Order online

Order online here. Choose what you're ordering, then fill in and sign Enagic's own order forms, with your own independent distributor or one we find for you. Enagic processes the order and takes payment. Kanjuni doesn't sell Enagic products.

A woman filling a glass with water at a kitchen tap