Leveluk Super 501

Dual-chamber continuous ionised electrolysis water generator, built for continuous strong acidic water production.

The Leveluk Super 501 is a continuous ionising water generator built around two independent ionising cells, one of seven plates and one of five, model TYH-501. It is a permanently plumbed machine rather than a tap-mounted one: it connects by hose and nut through a water supply solenoid valve, weighs 10.2 kg and measures 352 x 383 x 250 mm.

It is not a larger version of the domestic Leveluk machines. It produces Kangen Water® at 5.0 to 8.0 litres a minute, against 3.5 for the K8 and 2.0 to 3.0 for the Jr IV, and it produces its Strong waters by a different method — sodium chloride added by pump from a 2-litre tank holding approximately 300 g of salt made up with water.

The display and voice guidance are English only. The warranty is three years, with the electrolysis chamber covered for one.

Specifications

Figures are taken from the Leveluk Super 501 operation manual unless noted otherwise. Where the manual and Enagic's product comparison disagree, the manual is used, because it is the engineering document. Each row records its source.

Power is 220-240 V AC at 50-60 Hz, drawing approximately 200 W, which suits Australian supply directly. Protection is by overcurrent and overvoltage control, a 250 V 3.15 A fuse and a thermal protector set at 80 degrees Celsius.

Leveluk Super 501 specifications and where each figure comes from
SpecificationValueSource
Electrode plates7 and 5, in two independent cellsenagic.com/en_US/product-comparison
Model numberTYH-501enagic.com/en_US/product-comparison
Display and voice languages1 (English)enagic.com/en_US/product-comparison
Warranty3 years, with the electrolysis chamber covered for 1 yearLeveLuk Super 501 operation manual back cover
Water connectionPermanent connection by hose with nut, with a water supply solenoid valveLeveLuk Super 501 operation manual p.33
Ionising systemContinuous ionising system with a dual-line ionising cellLeveLuk Super 501 operation manual p.33
Selectable electrolysis levels7 levelsLeveLuk Super 501 operation manual p.33
Kangen Water® pH settingsApprox. pH 8.5, pH 9.0, pH 9.5LeveLuk Super 501 operation manual p.33
Purified Water pHApprox. 7.0 pHLeveLuk Super 501 operation manual p.33
Acidic Water pHApprox. 6.5 pHLeveLuk Super 501 operation manual p.33
Strong Kangen Water pHApprox. 11.0 pHLeveLuk Super 501 operation manual p.33
Strong Acidic Water pHApprox. 2.5 pHLeveLuk Super 501 operation manual p.33
Kangen Water production rate5.0-8.0 L/minLeveLuk Super 501 operation manual p.33
Acidic Water production rate1.5-2.5 L/minLeveLuk Super 501 operation manual p.33
Strong Acidic Water production rate1.5 L/minLeveLuk Super 501 operation manual p.33
Strong Kangen Water production rate1.2 L/minLeveLuk Super 501 operation manual p.33
Electrode and ionising cell materialPlatinum-plated titaniumLeveLuk Super 501 operation manual p.33
Ionising cell cleaningAutomatic cleaning system with a manual cleaning functionLeveLuk Super 501 operation manual p.33
Periodic cleaning methodNone. This manual describes no powder, soak or cleaning cartridge procedure: cleaning is an automatic 30-second cycle every 15 minutes of production, plus a manual cleaning button.LeveLuk Super 501 operation manual p.33
Sodium chloride tank cleaningFlush the air discharge pipe with 20-50 cc of tap water once every several monthsLeveLuk Super 501 operation manual p.33
Filter materialGranulated antibacterial activated charcoal, calcium sulfiteLeveLuk Super 501 operation manual p.33
Replacement filters named in the manualMW-7000R and MW-7000HG, both listed as activated charcoal type with no stated differenceLeveLuk Super 501 operation manual p.28
Filter replacement intervalNot published as a figure; the manual states only that it varies by region and water qualityLeveLuk Super 501 operation manual p.33
Substances removedSoluble lead, residual chlorine, odour and red rustLeveLuk Super 501 operation manual p.33
Substances not removedMetal ions and salt dissolved in the original tap waterLeveLuk Super 501 operation manual p.33
Electrolysis enhancer systemSodium chloride, added by pump. Approx. 300 g of salt made up in a 2 litre tank.LeveLuk Super 501 operation manual p.33
Enhancer refill indicationLow saltwater level lamp gives advance warning; the unit stops when sodium chloride is used upLeveLuk Super 501 operation manual p.33
Power supply220-240 V AC 50-60 Hz, 1 ALeveLuk Super 501 operation manual p.33
Power consumptionApprox. 200 WLeveLuk Super 501 operation manual p.33
Protective deviceOvercurrent and overvoltage control, fuse 250 V 3.15 A, thermal protector set at 80 degCLeveLuk Super 501 operation manual p.33
Detection deviceThermistor for hot waterLeveLuk Super 501 operation manual p.33
Power cord lengthApprox. 1.5 mLeveLuk Super 501 operation manual p.33
Dimensions (W x H x D)352 x 383 x 250 mmLeveLuk Super 501 operation manual p.33
Weight10.2 kgLeveLuk Super 501 operation manual p.33
Applicable water pressure0.05-0.5 MPa (6.5-73.0 psi)LeveLuk Super 501 operation manual p.33
Room temperature for siting5-40 degCLeveLuk Super 501 operation manual p.11

Price by country

Enagic sets its price separately in each country. These are the published prices before tax; each country's price list shows the tax, the total and the payment plans.

CountryOptionPrice before taxFull price list
Australia$6,850.00 AUDAustralia price list
United States$7,080.00 USDUnited States price list
New Zealand$7,360.00 NZDNew Zealand price list

Maintenance

The Super 501 has no E-Cleaning cycle and uses no cleaning powder. The manual describes no soak, no cleaning cartridge and no powder unit. Cleaning is automatic: a 30-second cycle runs every 15 minutes of production, and a manual cleaning button is available in addition. This is a different arrangement from every other machine on this site — the SD501 DX and K8 run a guided three-hour E-Cleaning cycle, and the SD501 Platinum and Jr IV use a Cleaning Powder Unit soak.

The sodium chloride tank needs its air discharge pipe flushed with 20 to 50 cc of tap water once every several months. A low saltwater level lamp gives advance warning, and the unit stops when the sodium chloride is used up.

The water filter is granulated antibacterial activated charcoal and calcium sulfite. Enagic states it removes soluble lead, residual chlorine, odour and red rust, and that it does not remove metal ions or salt dissolved in the original tap water.

What isn’t published

The manual names two replacement filters and does not distinguish them. Both the MW-7000R and the MW-7000HG are listed as activated charcoal type, with no stated difference between them and no guidance on which to order. An owner ordering a replacement has two part numbers and no basis for choosing.

No filter replacement interval is published. The manual gives no figure, stating only that it varies by region and water quality. The K8 and SD501 DX both publish approximately one year or approximately 6,000 litres.

No chlorine removal capacity is published. The manual states which substances the filter removes but gives no volume figure, where the domestic machines publish 6,000 litres or 1,500 US gallons.

Enagic publishes no plate size or ORP figure for this machine, where both are published for the K8 and the SD501U.

Questions

What does a Leveluk Super 501 cost in Australia?

The recommended price is $7,535 including GST, which is $6,850 before GST. Enagic does not offer an instalment plan on this machine; it is bought outright.

How is the Super 501 different from the other Leveluk machines?

It is a permanently plumbed machine with two independent ionising cells, seven plates and five, where the domestic machines have a single cell and connect through a tap diverter. It produces Kangen Water at 5.0 to 8.0 litres a minute, roughly twice the K8's rate. It uses sodium chloride from a 2-litre tank to produce its Strong waters, it weighs 10.2 kg against the K8's 5 kg, and it has no E-Cleaning cycle at all.

Does the Super 501 need E-Cleaning?

No. The manual describes no powder, soak or cleaning cartridge procedure. Cleaning runs automatically for 30 seconds every 15 minutes of production, and there is a manual cleaning button.

What is the salt tank for?

The Super 501 produces Strong Kangen Water and Strong Acidic Water using sodium chloride, added by pump from a 2-litre tank holding approximately 300 g of salt made up with water. A lamp warns when the level is low and the unit stops when it runs out. The air discharge pipe is flushed with 20 to 50 cc of tap water once every several months.

What water types does the Super 501 produce?

Kangen Water at approximately pH 8.5, 9.0 and 9.5, Purified Water at approximately pH 7.0, Acidic Water at approximately pH 6.5, Strong Kangen Water at approximately pH 11.0 and Strong Acidic Water at approximately pH 2.5, across seven selectable levels. Two of those names differ from the domestic machines, which call the equivalents Clean Water and Beauty Water, the latter at approximately pH 6.0 rather than 6.5.

Which filter does the Super 501 take?

The manual names two, the MW-7000R and the MW-7000HG, both as activated charcoal type. It states no difference between them.

Is the Super 501 sold in Australia?

Yes, by Enagic Australia, through independent distributors.

Order online

Order online here. Choose what you're ordering, then fill in and sign Enagic's own order forms, with your own independent distributor or one we find for you. Enagic processes the order and takes payment. Kanjuni doesn't sell Enagic products.

A woman filling a glass with water at a kitchen tap