Leveluk SD501U

Under-sink continuous ionised electrolysis water generator with a separate wall-mounted controller and a dedicated bench-top faucet.

The Leveluk SD501U is a seven-plate water ioniser installed under a bench rather than mounted at a tap. The generator sits in a cabinet, a controller mounts on the bench top, and a dedicated faucet delivers the water.

It is the fastest machine in the Leveluk range. Enagic states Kangen Water® production at 4.5 to 7.5 litres a minute, where the K8 produces 3.5 and the Jr IV 2.0 to 3.0. It produces five water types across seven selectable electrolysis levels, from approximately pH 2.5 to approximately pH 11.0.

The plates are platinum-plated titanium at 135 x 75 mm, and Enagic publishes a negative ORP of -631 mV. The warranty is five years.

Enagic lists the SD501U as available in the United States. It is not currently listed for Australia, and no Australian price is published for it.

Specifications

Figures are taken from the Leveluk SD501U installation manual unless noted otherwise. Where the manual and Enagic's product pages disagree, the manual is used, because it is the engineering document. Each row records its source.

The published power supply is the United States configuration, AC120V 60Hz at a rated current of 3.2 A, drawing a maximum of approximately 230 W. Australian supply is 230 V at 50 Hz.

Because this is an under-bench installation, the manual publishes dimensions a tap-mounted machine does not: the cabinet space required, the generator body from the fitting diagram, the controller, the faucet and its spout reach, the bench top hole diameter and the maximum bench top thickness. All are listed in the specifications.

Leveluk SD501U specifications and where each figure comes from
SpecificationValueSource
Electrode plates7enagic.com/en_US/products/leveluk-sd501u-under-counter
Plate size135 x 75 mmenagic.com/en_US/products/leveluk-sd501u-under-counter
Negative ORP-631 mVenagic.com/en_US/products/leveluk-sd501u-under-counter
Water types produced5 typesenagic.com/en_US/products/leveluk-sd501u-under-counter
Display and voice languages1enagic.com/en_US/products/leveluk-sd501u-under-counter
Warranty5 yearsenagic.com/en_US/products/leveluk-sd501u-under-counter
Ionising systemContinuous ionising system, built-in flow rate sensorLeveLuk SD501U installation manual p.30
Feed water connectionWater supply valve closed typeLeveLuk SD501U installation manual p.30
pH range across all settingsApprox. pH 2.5 to pH 11.0LeveLuk SD501U installation manual p.30
Selectable electrolysis levels7 levelsLeveLuk SD501U installation manual p.30
Kangen Water® pH settingsApprox. pH 8.5, pH 9.0, pH 9.5LeveLuk SD501U installation manual p.30
Clean Water pHApprox. 7.0 pHLeveLuk SD501U installation manual p.30
Beauty Water pHApprox. 6.0 pHLeveLuk SD501U installation manual p.30
Strong Kangen Water pHApprox. 11.0 pHLeveLuk SD501U installation manual p.30
Strong Acidic Water pHApprox. 2.5 pHLeveLuk SD501U installation manual p.30
Kangen Water production rate4.5-7.5 L/min (1.2-2.0 US gal/min)LeveLuk SD501U installation manual p.30
Strong Acidic Water production rate0.6-1.2 L/min (0.2-0.3 US gal/min)LeveLuk SD501U installation manual p.30
Feed water pressure for Kangen Water productionApprox. 200 kPa (29 psi)LeveLuk SD501U installation manual p.30
Feed water pressure for Strong Acidic Water productionApprox. 100 kPa (15 psi)LeveLuk SD501U installation manual p.30
Electrode and ionising cell materialPlatinum-plated titaniumLeveLuk SD501U installation manual p.30
Ionising cell cleaningAutomatic cleaning systemLeveLuk SD501U installation manual p.30
Filter materialGranulated antibacterial activated charcoal, calcium sulfiteLeveLuk SD501U installation manual p.30
Substances removedResidual chlorine (sterilizer), odour and red rustLeveLuk SD501U installation manual p.30
Substances not removedMetal ions and salt dissolved in the original tap waterLeveLuk SD501U installation manual p.30
Filter replacement intervalNot published as a figure; the manual states only that it varies by region and water qualityLeveLuk SD501U installation manual p.30
Electrolysis enhancer systemForced dissolving adding type for Strong Acidic Water productionLeveLuk SD501U installation manual p.30
Enhancer refill indicationVoice guidance, alarm sound, LCD messageLeveLuk SD501U installation manual p.30
Power supplyAC120V 60Hz (United States configuration)LeveLuk SD501U installation manual p.30
Rated current3.2 ALeveLuk SD501U installation manual p.30
Power consumptionMax. approx. 230 WLeveLuk SD501U installation manual p.30
Current fuse6 ALeveLuk SD501U installation manual p.30
Detection deviceDetection of temperature rise and hot waterLeveLuk SD501U installation manual p.30
Power cord lengthApprox. 1.8 mLeveLuk SD501U installation manual p.30
Main unit dimensions (H x W x D)Approx. 338 x 264 x 171 mm (13.3 x 10.4 x 6.7 in)LeveLuk SD501U installation manual p.30
WeightApprox. 6.3 kg (13.9 lb)LeveLuk SD501U installation manual p.30
Cabinet space required (H x W x D)430 x 380 x 220 mmLeveLuk SD501U installation manual p.7
Generator body dimensions from the fitting diagram (H x W x D)365 x 300 x 210 mmLeveLuk SD501U installation manual p.10
Controller dimensions (W x H x D)205 x 90 x 32.3 mmLeveLuk SD501U installation manual p.10
Faucet dimensions299 mm high with a 156 mm spout reachLeveLuk SD501U installation manual p.10
Faucet pipe section length320 mm at its longestLeveLuk SD501U installation manual p.10
Bench top hole diameter for the faucet38-40 mmLeveLuk SD501U installation manual p.17
Maximum bench top thickness35 mmLeveLuk SD501U installation manual p.13
Applicable water pressure50-450 kPa (7-65 psi; approx. 0.5-4.5 kgf/cm2)LeveLuk SD501U installation manual p.30
Available water temperature5-35 degC (41-95 degF)LeveLuk SD501U installation manual p.30

Price by country

Enagic sets its price separately in each country. These are the published prices before tax; each country's price list shows the tax, the total and the payment plans.

CountryOptionPrice before taxFull price list
United States$5,890.00 USDUnited States price list

Maintenance

The SD501U cleans its ionising cell automatically.

The water filter is granulated antibacterial activated charcoal and calcium sulfite. Enagic states it removes residual chlorine, odour and red rust, and that it does not remove metal ions or salt dissolved in the original tap water.

Strong Acidic Water production uses a forced dissolving adding type electrolysis enhancer. The unit indicates a refill by voice guidance, an alarm sound and an LCD message.

E-Cleaning a LeveLuk SD501

What isn’t published

No filter replacement interval is published. The manual gives no figure, stating only that it varies by region and water quality. The K8 and the SD501 DX both publish approximately one year or approximately 6,000 litres.

No chlorine removal capacity is published. The manual names the substances the filter removes but gives no volume figure, where the domestic machines publish 6,000 litres or 1,500 US gallons.

No replacement filter is named. The manual specifies the filter material but no part number.

Only the United States electrical configuration is published. The manual gives AC120V 60Hz. No 220-240 V specification appears, where the SD501 Platinum and Jr IV manuals publish both. This matters for any market on 230 V supply.

No E-Cleaning or periodic cleaning procedure is published. The manual states that cell cleaning is automatic and describes no owner-performed cleaning cycle, where the SD501 DX and K8 publish a guided three-hour E-Cleaning cycle and the SD501 Platinum and Jr IV a Cleaning Powder Unit soak.

Questions

Is the Leveluk SD501U sold in Australia?

Not currently. Enagic lists it as available in the United States. No Australian price is published for it, so none is shown here.

How is the SD501U different from the other Leveluk ionisers?

It installs under a bench rather than at a tap: the generator sits in a cabinet, a controller mounts on the bench top and a dedicated faucet delivers the water. It is also the fastest machine in the range, producing Kangen Water at 4.5 to 7.5 litres a minute against the K8's 3.5.

What space does the SD501U need?

Enagic states a cabinet space of 430 x 380 x 220 mm. The generator body is 365 x 300 x 210 mm from the fitting diagram, the controller is 205 x 90 x 32.3 mm, and the faucet stands 299 mm high with a 156 mm spout reach. The bench top needs a hole of 38 to 40 mm and must be no more than 35 mm thick.

How fast does the SD501U produce water?

Kangen Water at 4.5 to 7.5 litres a minute at a feed pressure of approximately 200 kPa, and Strong Acidic Water at 0.6 to 1.2 litres a minute at approximately 100 kPa. The two figures are quoted at different pressures and are not directly comparable.

What water types does the SD501U produce?

Five, across seven selectable electrolysis levels: Kangen Water at approximately pH 8.5, 9.0 and 9.5, Clean Water at approximately pH 7.0, Beauty Water at approximately pH 6.0, Strong Kangen Water at approximately pH 11.0 and Strong Acidic Water at approximately pH 2.5.

Does the SD501U need E-Cleaning?

Enagic publishes no owner-performed cleaning procedure for this machine. The manual states that ionising cell cleaning is automatic.

Order online

Order online here. Choose what you're ordering, then fill in and sign Enagic's own order forms, with your own independent distributor or one we find for you. Enagic processes the order and takes payment. Kanjuni doesn't sell Enagic products.

A woman filling a glass with water at a kitchen tap