Leveluk SD501 Platinum

Seven-plate continuous ionised electrolysis water generator with a five-language display and voice prompt.

The Leveluk SD501 Platinum is a seven-plate water ioniser. It connects to a kitchen tap through a one-way diverter and produces five water types across seven selectable electrolysis levels, with display and voice guidance in five languages.

The electrodes and ionising cell are platinum-plated titanium. Enagic gives the machine a five-year warranty.

It weighs approximately 6.3 kg and measures 338 x 264 x 171 mm.

The manual's WQA certification block prints the model number TYH-401. That is the identifier as certified, and it is recorded here as such rather than as a general model designation.

Specifications

Figures are taken from the Leveluk SD501 Platinum operation manual unless noted otherwise. Where the manual and Enagic's product comparison disagree, the manual is used, because it is the engineering document. Each row records its source.

Electrical figures differ by region. The manual gives 120 V AC 60 Hz 3.2 A for the United States and 220–240 V AC 50–60 Hz 1.6 A for Europe and parts of Asia, with a correspondingly different fuse rating. Australian supply is 230 V, so the second set applies.

Leveluk SD501 Platinum specifications and where each figure comes from
SpecificationValueSource
Electrode plates7enagic.com/en_US/product-comparison
Model numberTYH-401, as printed in the manual’s WQA certification blockLeveLuk SD501 Platinum operation manual p.35
Water types produced5 typesenagic.com/en_US/product-comparison
Display and voice languages5enagic.com/en_US/product-comparison
Warranty5 yearsenagic.com/en_US/product-comparison
Water connectionOne way diverterLeveLuk SD501 Platinum operation manual p.35
Ionising systemContinuous ionising system, built-in flow rate sensorLeveLuk SD501 Platinum operation manual p.35
Selectable electrolysis levels7 levelsLeveLuk SD501 Platinum operation manual p.35
Kangen Water® pH settingsApprox. pH 8.5, pH 9.0, pH 9.5LeveLuk SD501 Platinum operation manual p.35
Clean Water pHApprox. 7.0 pHLeveLuk SD501 Platinum operation manual p.35
Beauty Water pHApprox. 6.0 pHLeveLuk SD501 Platinum operation manual p.35
Strong Kangen Water pHApprox. 11.0 pHLeveLuk SD501 Platinum operation manual p.35
Strong Acidic Water pHApprox. 2.5 pHLeveLuk SD501 Platinum operation manual p.35
Kangen Water production rate2.5-4.0 L/min (0.7-1.1 US gal/min) at 100 kPaLeveLuk SD501 Platinum operation manual p.35
Strong Acidic Water production rate0.6-1.2 L/min (0.2-0.3 US gal/min) at 100 kPaLeveLuk SD501 Platinum operation manual p.35
Electrode and ionising cell materialPlatinum-plated titaniumLeveLuk SD501 Platinum operation manual p.35
Ionising cell cleaningAutomatic cleaning systemLeveLuk SD501 Platinum operation manual p.35
Periodic cleaning methodCleaning Powder Unit (CPU-N) fitted in place of the water filter, with a three to five hour soak. Not a display-guided cycle.LeveLuk SD501 Platinum operation manual p.35
Stated cleaning frequencyOnce every week to two weeksLeveLuk SD501 Platinum operation manual p.35
Filter materialGranulated antibacterial activated charcoal, calcium sulfiteLeveLuk SD501 Platinum operation manual p.35
Replacement filter named in the manualHG-N, activated charcoal typeLeveLuk SD501 Platinum operation manual p.34
Current replacement filterEnagic states the FC1 filter replaces the discontinued F8 High Grade and HG-N filtersenagic.com/en_US/product-comparison
Filter replacement intervalNot published as a figure; the manual states only that it varies by region and water qualityLeveLuk SD501 Platinum operation manual p.35
Chlorine taste and odour removal capacityAesthetic chlorine, taste and odour up to 1500 US gallonsLeveLuk SD501 Platinum operation manual p.35
Substances not removedMetal ions and salt dissolved in the original tap waterLeveLuk SD501 Platinum operation manual p.35
Water filter case materialABS resinLeveLuk SD501 Platinum operation manual p.29
Power supply120 V AC 60 Hz 3.2 A (USA); 220-240 V AC 50-60 Hz 1.6 A (Europe and parts of Asia)LeveLuk SD501 Platinum operation manual p.35
Power consumptionMax. approx. 230 W at a high Kangen pH levelLeveLuk SD501 Platinum operation manual p.35
Protective deviceCurrent fuse 6 A at 120 V; 3 A at 220-240 VLeveLuk SD501 Platinum operation manual p.35
Detection deviceDetection of temperature rise and hot waterLeveLuk SD501 Platinum operation manual p.35
Power cord lengthApprox. 1.5 mLeveLuk SD501 Platinum operation manual p.35
Dimensions (H x W x D)338 x 264 x 171 mm (13.3 x 10.4 x 6.7 in)LeveLuk SD501 Platinum operation manual p.35
WeightApprox. 6.3 kg (13.9 lb)LeveLuk SD501 Platinum operation manual p.35
Applicable water pressure50-450 kPa (7-65 psi; approx. 0.5-4.5 kgf/cm2)LeveLuk SD501 Platinum operation manual p.35
Available water temperature5-35 degC (41-95 degF)LeveLuk SD501 Platinum operation manual p.35

Price by country

Enagic sets its price separately in each country. These are the published prices before tax; each country's price list shows the tax, the total and the payment plans.

CountryOptionPrice before taxFull price list
Australia$4,770.00 AUDAustralia price list

Maintenance

The SD501 Platinum has two maintenance procedures, and its cleaning procedure is not the guided E-Cleaning cycle found on some other Enagic machines.

Periodic cleaning uses a Cleaning Powder Unit, the CPU-N, fitted in place of the water filter and left to soak for three to five hours. There is no display-guided cycle and no on-screen timer. Enagic states it should be done once every week to two weeks.

The water filter is granulated antibacterial activated charcoal and calcium sulfite in an ABS resin case. The manual names the HG-N filter as the replacement. Enagic states that the FC1 filter now replaces both the discontinued F8 High Grade and the HG-N, so a machine bought today is served by the FC1.

Automatic cleaning runs as part of normal operation.

Enagic states the filter removes aesthetic chlorine, taste and odour up to 1,500 US gallons, and that it does not remove metal ions or salt dissolved in the original tap water.

E-Cleaning a LeveLuk SD501

What isn’t published

No filter replacement interval is published. The manual gives no figure at all, stating only that it varies by region and water quality. Other Enagic machines publish both a time and a volume — the SD501 DX gives approximately one year or approximately 6,000 litres — so the absence here is in the document rather than in this record. An owner has no published basis for deciding when to replace it.

The manual names a filter Enagic has discontinued. The document specifies the HG-N; Enagic's current material states the FC1 supersedes it. Both facts are recorded above rather than one being silently preferred.

No electrolyser life, IP code or electric shock protection class is published. The SD501 DX's manual publishes all three. This manual publishes none of them.

Questions

What does a Leveluk SD501 Platinum cost in Australia?

The recommended price is $5,247 including GST, which is $4,770 before GST. Five instalment plans are available, over 3, 6, 10, 16 or 20 months.

Is the SD501 Platinum an upgrade on the SD501 DX?

No. They are different machines rather than two grades of one, and the Platinum is the less expensive of the two in Australia. The DX runs a display-guided E-Cleaning cycle of about three hours; the Platinum is cleaned with a Cleaning Powder Unit fitted in place of the filter and left to soak for three to five hours. The DX offers eight display languages against the Platinum's five, and the two machines take different filters.

How is the SD501 Platinum cleaned?

With a Cleaning Powder Unit, the CPU-N, fitted where the water filter goes and left to soak for three to five hours. Enagic states this should be done once every week to two weeks. It is not the guided E-Cleaning cycle used on the SD501 DX.

Which filter does the SD501 Platinum take?

The manual names the HG-N. Enagic states the FC1 filter now replaces both the HG-N and the discontinued F8 High Grade, so a machine bought today takes the FC1.

How often should the filter be replaced?

Enagic publishes no interval for this machine. The manual states only that it varies by region and water quality.

What water types does the SD501 Platinum produce?

Five, across seven selectable electrolysis levels: Kangen Water at approximately pH 8.5, 9.0 and 9.5, Clean Water at approximately pH 7.0, Beauty Water at approximately pH 6.0, Strong Kangen Water at approximately pH 11.0 and Strong Acidic Water at approximately pH 2.5.

Is the SD501 Platinum sold in Australia?

Yes, by Enagic Australia, through independent distributors.

Order online

Order online here. Choose what you're ordering, then fill in and sign Enagic's own order forms, with your own independent distributor or one we find for you. Enagic processes the order and takes payment. Kanjuni doesn't sell Enagic products.

A woman filling a glass with water at a kitchen tap